OUR SPECIAL "BOARDBULBS" FOR DIVERS HELMET LAMPS.
Red/white for stop/tail/number plate
Amber for flashing indicators
BA15d is a 15mm cap with parallel pins used in early stop/tail lamps and in reproduction indicator lamps
BAY15d is a 15mm cap with staggered pins commonly used for stop/tail in some reproduction lamps
Part No.1
***SOLD OUT OF BA15d***
WE ARE CURRENTLY REDESIGNING THIS BULB
12v 21/5w BA15d (PARALLEL PIN) AND BAY15d (STAGGERED PIN)
36mm diameter negative earth stop/tail and number plate directly replaces a standard bulb.
Can be used where the stop lamp is also a flashing indicator.
Especially for Divers Helmet lamps as fitted to many vintage cars.
Gives bright red to the rear for stop and tail and white to the side for number plate illumination (if req).
Left hand or right hand types - White to the left or white to the right for number plate.
Simply fit the boardbulb and turn the holder so that the board faces rearwards.
Sold singly or in pairs.
Part No.2
**NEW**
12v 21w BA15d (PARALLEL PIN)
36mm amber light board directly replaces a standard light bulb.
Cap terminals are + and -
Especially for retro fitted amber Divers Helmet lamps used for flashing indicators .
Gives bright amber to the rear and side.
Simply fit the boardbulb and turn the holder so that the board faces rearwards.
Requires our LED flasher unit.
Sold in pairs.