Our fully electronic units that replace
            Lucas RB106, RF95 and RB340 regulators

    Also a range of exacting reproduction parts. 
   Replacement lids, cover clips and screw terminals

Replacement lids available in BROWN and BLACK

To fit...................
Lucas
 RF91/92
CFR2
RJF regulator cover
RJF fuse cover with screw
CJF2 cut out cover
CJF2 fuse cover with screw
RF50
CJR3 cut out cover
Fuse cover lids complete with fixing screw and internal spare fuse clip for all Lucas RJF and CJF

CF1
CF3
RB106 (also fits our ADR106) Black only
RF95 (also fits our ADR95) Black only
Also SF4 fuse covers and
Austin Seven horn covers

Part numbers 5 & 6

NOS LUCAS 1" field fuses for 3 brush dynamos



All our reproduction parts are proudly made in England for us supporting English manufacturing.
You won't find them anywhere else.


***AS SEEN IN MINI WORLD, TRIUMPH WORLD, CLASSIC MONTHLY AND 
PRACTICAL CLASSICS MAGAZINE***


Our simple replacement for any Lucas RB106 or RF95

Much better than the originals and 1000 times better than horrible inferior foreign made mechanical copies that don't last!


Direct replacement easy to fit units. 
Inside the ADR106 & ADR95 you won't find an outdated mechanical regulator. 
You will however find our latest Solid State electronic regulator. 
Unlike the original, the ADR is fully fuse protected.
Supplied with our initials on the lids but 
you can fit your original Lucas lid if you prefer.

Your questions answered HERE 

 
 


Our exacting replacement for the original RB106 and RF95. 
They look exactly the same but that's where the similarity ends.

These ARE NOT Lucas branded units. 
They are our own units, designed and made by us to replace original Lucas units. 


They ARE NOT refurbished original units with our electronic regulator inside and they ARE NOT made in India or China.

They are hand made using the highest quality new English made components right here at our works in Lincolnshire. They are the best.


Inside the ADR106 & ADR95 you won't find an outdated mechanical regulator. 
You will however find our latest Solid State electronic regulator. 
The ADR's pcb is made right here in Lincoln, UK

Unlike the originals, the ADR is fully fuse protected.


Nickel plated spade or screw terminals and screws.
Outright purchase - No part exchange required -  No waiting.
Simple instructions supplied with each unit.

No setting up - No adjustments - No parts to wear out.
Just remove your old unit and fit the ours in its place. 
All you need to do is polarise your two brush dynamo before fitting.



 Available to suit any two brush Lucas configured (B type field) dynamo                (or a 3 brush dynamo PROPERLY converted to 2 brush)


Click HERE to read more

All our regulators use only the highest quality branded components

We will not subtitute any components for cheaper brands as this keeps our quality and standards very high

RB106 SCREW TERMINAL TYPE


Part No. 1

*ALL ELECTRONIC REGULATORS SENT TO UK ADDRESSES ARE SENT BY ROYAL MAIL SPECIAL DELIVERY  *
* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *

Our fully electronic RB106 replacement with screw terminals.
Available in 6v or 12v as original.
Replaces Lucas RB106, NCB100 , LRC100, 37086, 37138, 37182, 37294, 37384, E93a and others.
Used on many British cars and tractors from 1949-1964 including :

Mini all models 1959-1963

Aston Martin DB2/4 Mk I

AUSTIN A30, A35, A40, A60 and Healey Sprite to 1963

FORD Popular and Consul  to 1953 to 1964, Anglia to 1963

Fordson Major tractor (11 amp)

LAND ROVER 1949-1963

MORRIS Minor and Oxford  1949-1963

RILEY Elf and Four Seventy Two to 1963

SUNBEAM Alpine and Rapier  1964

TRIUMPH Herald  1959-1963, TR2, TR3, 

WOLSELEY Hornet and 16/60 to 1963

and many others................

Choose whether you want your regulator supplied with a lid and clip

(An original Lucas lid and clip will fit our regulators for that 'original' look)

.
Choose the current setting to suit your dynamo.
Click HERE to see a list of safe maximum outputs for Lucas dynamos

All ADR's come with new nickel plated brass terminal screws. 
Choose early or late type grub screws.

Click HERE to read more

See part number 5 for our replacement lids

Please note: 
Any returns made because you ordered wrongly i.e you ordered positive earth when you required negative earth will incur a £10.00 re-stocking charge.
Please make sure you know the correct polarity of your vehicle when buying our regulators

* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *

WITH OR WITHOUT A LID & A CLIP?
SCREW TYPE
VOLTAGE & CURRENT LIMIT
RB106 LUCAR (SPADE) TERMINAL TYPE

 

Part No. 2


*ALL ELECTRONIC REGULATORS SENT TO UK ADDRESSES ARE SENT BY ROYAL MAIL SPECIAL DELIVERY  *
* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *

Our fully electronic RB106 replacement with Lucar (spade) terminals
12v 22 amp
Suitable for many car and tractors fitted with Lucas C40 dynamos.
Replaces Lucas RB106,NCB101 , 37294 , 37290F , 37290E , 37290D , 37290, 37283 , 37183 , 37179 , 37139 , 37066.


Applications include: 

Mini all models including Moke 1964-1972

AUSTIN A35 , A40 , A60 and Healey Sprite  1964-1969

FORD Popular and Consul  1964, Anglia 105E  1964-1966

HILLMAN Minx and Husky  1964

HUMBER Hawk  1964-1965

LAND ROVER 1964-1970

MG Midget and Magnette  1964-1969

MORRIS Minor and Oxford  1964-71

RELIANT Regal , Rebel , TW9E , TW9C  1964 on, Sabre  1964-1965

RILEY Elf and Four Seventy Two  1964-1969

SINGER Gazell  1964

SUNBEAM Alpine and Rapier  1964

TRIUMPH Herald  1964-1971

WOLSELEY Hornet and 16/60  1964-1971

and many others...........


Choose whether you want your regulator supplied with a lid and clip

(An original Lucas lid and clip will fit our regulators for that 'original' look)


Click HERE to see a list of safe maximum outputs for Lucas dynamos

Click HERE to read more

See part number 5 for our replica LUCAS lids


Please note: 
Any returns made because you ordered wrongly i.e you ordered positive earth when you required negative earth will incur a £10.00 re-stocking charge.
Please make sure you know the correct polarity of your vehicle when buying these regulators

* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *

WITH OR WITHOUT A LID & A CLIP?
POLARITY
RF95 TYPE

Part No. 3


*ALL ELECTRONIC REGULATORS SENT TO UK ADDRESSES ARE SENT BY ROYAL MAIL SPECIAL DELIVERY *
* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *


Our fully electronic RF95 replacement with screw terminals
Available in 6v or 12v as original.
Replaces Lucas 37057,37062, 37065, 37076, 37081, 37092, 37093, 37097, 37105, 37111 and 37112.
Used on many British cars from 1939-1955 including :

Alvis all models 1946-48

Armstrong Siddeley, ‘Hurricane’, ‘Lancaster' 46-48, ‘Typhoon’ 1948

Austin 10 & 12 46-47, 16 46-48

Citroen (Slough built models) 46-55, 15 46-50;

Commer, Daimler, Hillman, HRG, Humber, Jaguar, Jensen, Karrier, Lanchester, Lea Francis, MG, Morgan, Morris, Reliant, Riley, Singer, Standard, Sunbeam Talbot, Triumph, Trojan, Vauxhall and Wolseley.

Most cars that used an RF95 were positive earth but please check to see if your car has been converted to negative earth as many were by previous owners.


Choose the current setting to suit your dynamo.
Click HERE to see a list of safe maximum outputs for Lucas dynamos

All ADR's come with new nickel plated brass terminal screws. 
Choose early or late type grub screws.

Click HERE to read more

See part number 5 for our replacement lids


Please note: 
Any returns  made because you ordered wrongly i.e you ordered positive earth when you required negative earth will incur a £10.00 re-stocking charge.
Please make sure you know the correct polarity of your vehicle when buying these regulators

* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *

WITH OR WITHOUT A LID & A CLIP?
CHOOSE VOLTAGE & CURRENT LIMIT
CHOOSE POLARITY
SCREW TYPE
ELECTRONIC LUCAS RB340 REGULATORS



Part No. 4

*ALL ELECTRONIC REGULATORS SENT TO UK ADDRESSES ARE SENT BY ROYAL MAIL SPECIAL DELIVERY *
* IF ORDERING FROM OUTSIDE OF THE UK, PLEASE PHONE OR EMAIL YOUR ORDER SO THAT WE CAN ADD TRACKED/SIGNED DELIVERY *


Genuine Lucas RB340 regulators that we've restored and fitted with our ADR electronic internals

Forget nasty, cheap Indian made replicas that don't last and don't look right

These are the real thing

Direct replacement - Fit and forget

Available in :

12v 11a -Fordson Super Major 5000, 4000, Super Dexta 3000 etc

12v 22a - Fits many 1960's cars

12v 25a - Fits many late 1960's cars

Negative and positive earth units

Outright purchase - No PX/old unit required

SELECT CURRENT RATING
CHOOSE POLARITY


Tidy up your Lucas regulator with our range of replacement parts.
 
REPLACEMENT BRASS AND NICKEL PLATED BRASS  TERMINAL SCREWS
EARLY AND LATE TYPES

Part No. 5

1/4" bsf grub screws as used in all Lucas regulators and cut outs.

Please note: 
These screws won't fit horrible Indian made copies which use a metric grubscrew
Choose Part
REPLACEMENT REGULATOR LIDS


Part No. 6

Excellent quality replacement lids to fit: 

 RB106
 RF95 (with fuse clip)
RF91/92
RJF
RJF/RFJ/RF50 fuse cover lids complete with fixing screw

Click on the pictures to enlarge them


Choose Type
REPLACEMENT CUT OUT LIDS

Part No. 7

Excellent quality replacement lids to fit: 

 CFR2
CFR Fuse cover
CJF
CJR2
SF4 fuse box lid
CJF/CJR fuse cover lids complete with fixing screw

Click on the pictures to enlarge them

Choose Type

REPLACEMENT LID CLIPS


Part No. 8

Fits RB106, RF95 and our ADR106. 
Smooth galvanised so they won't rust! Can be painted
Choose Quantity
Genuine LUCAS Field Fuses for Pre War Three Brush Dynamos

Part No. 9

Very hard to find 1" (25mm) field fuses for pre war 3 brush dynamos
These have been unavailable for many years but we are lucky enough to have a substantial quantity of new old stock to suit 6v and 12v dynamos

In dry store for many years so will need the brass end caps cleaning with wire wool before use

Available in:
3.75 amp and 6 amp for 6v dynamos
4.5 amp for 12v dynamos


All @ £1.25 each plus VAT
CHOOSE QUANTITY
CHOOSE RATING IN AMPS

Make a free website with Yola